This is the multi-page printable view of this section. Click here to print.
Within here, you can find a reference for all commands in the module. This reference is designed to help you quickly find the command you need and understand how to use it effectively.
By clicking on a command, you will be taken to a detailed page that provides comprehensive information about the command, including its syntax, parameters, examples, and any additional notes or tips for usage.
Add rule for checking and reporting on installed modules
Add-PackageUpdateRule [[-Id] <int>] [[-IncludeModuleForChecking] <string[]>]
[[-ExcludeModuleFromChecking] <string[]>] [[-ReportChangeOnMajor] <bool>]
[[-ReportChangeOnMinor] <bool>] [[-ReportChangeOnBuild] <bool>] [[-ReportChangeOnRevision] <bool>]
[[-SettingObject] <Configuration>] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
This cmdlet has the following aliases,
This command allows to declare how a modules is handled in reporting for special.
For example, you can configure PackageUpdateINfo to suppress revision updates on a frequent updated module, so that only build, minor or major updates are reportet as “update needed”.
PS C:\> Add-PackageUpdateRule -IncludeModuleForChecking "MyModule" -ReportChangeOnMajor $true -ReportChangeOnMinor $true -ReportChangeOnBuild $true -ReportChangeOnRevision $false
Add a new custom rule for “MyModule” to supress notifications on revision updates of the module
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to exclude from update checking
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Exclude
- ExcludeModule
ParameterSets:
- Name: (All)
Position: 2
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The Id as an identifier for the rule
Type: Int32
DefaultValue: 0
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 0
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to include from update checking By default all modules are included.
Default value is: “*”
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Include
- IncludeModule
ParameterSets:
- Name: (All)
Position: 1
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The rule object will be parsed to the pipeline for further processing
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when build version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, when the build version version of a module change.
Major Minor Build Revision
0 0 1 0
Type: Boolean
DefaultValue: True
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 5
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when major version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, only when the major version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: True
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 3
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when minor version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, only when the minor version version of a module change.
Major Minor Build Revision
0 1 0 0
Type: Boolean
DefaultValue: True
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 4
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when revision part changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, when the revision version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: True
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 6
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object parsed in from command Get-PackageUpdateSetting This is an optional parameter. By default it will use the default settings object from the module.
Type: Configuration
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: 7
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Export PackageUpdateInfo to a data file
Export-PackageUpdateInfo [[-Path] <string>] -InputObject <Info[]> [-OutputFormat <string>]
[-Encoding <string>] [-Force] [-Append] [-IncludeTimeStamp] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
This cmdlet has the following aliases,
Export PackageUpdateInfo to a data file
PS C:\> Get-PackageUpdateInfo | Export-PackageUpdateInfo
Example for usage of Export-PackageUpdateInfo
The output file will not be replaced. All information will be appended.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
File Encoding for the file
Type: String
DefaultValue: default
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If the directory for the file is not present, but a directory other then the default is specified, the function will try to create the diretory.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
A timestamp will be added to the information records.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The PackageUpdateInfo from Get-PackageUpdateInfo function.
Type: Info[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The output format for the data Available formats are “XML”,“JSON”,“CSV”
Type: String
DefaultValue: XML
SupportsWildcards: false
Aliases:
- Format
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The exported objects will be parsed to the pipeline for further processing.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The filepath where to export the infos. Please specify a file as path.
Default path value is: Linux: “$HOME/.local/share/powershell/PackageUpdateInfo/PackageUpdateInfo.xml”) Windows: “$HOME\AppData\Local\Microsoft\Windows\PowerShell\PackageUpdateInfo.xml”)
Type: String
DefaultValue: ''
SupportsWildcards: false
Aliases:
- FullName
- FilePath
ParameterSets:
- Name: (All)
Position: 0
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Get info about up-to-dateness for installed modules
Get-PackageUpdateInfo [-Name <string[]>] [-Repository <string[]>] [-ShowOnlyNeededUpdate]
[-ShowToastNotification] [-Force] [<CommonParameters>]
Get-PackageUpdateInfo [-Name <string[]>] [-Repository <string[]>] [-ShowOnlyNeededUpdate]
[-ShowToastNotification] [-CurrentUser] [-Force] [<CommonParameters>]
Get-PackageUpdateInfo [-Name <string[]>] [-Repository <string[]>] [-ShowOnlyNeededUpdate]
[-ShowToastNotification] [-AllUsers] [-Force] [<CommonParameters>]
This cmdlet has the following aliases,
Get-PackageUpdateInfo query locally installed modules and compare them against the online versions for up-to-dateness
PS C:\> Get-PackageUpdateInfo
Outputs update information for all modules (currentUser and AllUsers). Output can look like:
Name Repository VersionInstalled VersionOnline NeedUpdate Path
PSReadline PSGallery 1.2 1.2 False C:\Program Files\WindowsPowerShell\Modules\PSReadline Pester PSGallery 4.4.0 4.4.2 True C:\Program Files\WindowsPowerShell\Modules\Pester
PS C:\> Get-PackageUpdateInfo -ShowOnlyNeededUpdate
This will filter output to show only modules where NeedUpdate is True Output can look like:
Name Repository VersionInstalled VersionOnline NeedUpdate Path
Pester PSGallery 4.4.0 4.4.2 True C:\Program Files\WindowsPowerShell\Modules\Pester
PS C:\> "Pester", "PSReadline" | Get-PackageUpdateInfo
Pipeline is supported. This returns the infos only for the two modules “Pester”, “PSReadline”
This also can be done with Get-Module cmdlet: Get-Module “Pester”, “PSReadline” | Get-PackageUpdateInfo
Only look for modules in the AllUsers/system directories. Keep in mind, that admin rights are required to update those modules.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: AllUsers
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Only look for modules in the current user profile. This is helpfully if you’re running without admin right, which you should always do as your default work preference.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: CurrentUser
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Force to query info about up-to-dateness for installed modules, even if the UpdateCheckInterval from last check is not expired.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The name of the module to check
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The repository to check
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This switch suppresses up-to-date modules from the output.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This switch invokes nice Windows-Toast-Notifications with release note information on modules with update needed.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases:
- ToastNotification
- Notify
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Get rule(s) for checking and reporting on installed modules
Get-PackageUpdateRule [-IncludeModuleForChecking <string>] [-ExcludeModuleFromChecking <string>]
[-IncludeDefaultRule] [-SettingObject <Configuration>] [<CommonParameters>]
Get-PackageUpdateRule -Id <int[]> [-SettingObject <Configuration>] [<CommonParameters>]
This cmdlet has the following aliases,
This command get the existing custom rule(s) how modules are handled in reporting.
PS C:\> Get-PackageUpdateRule
Get all the existing custom rules
PS C:\> Get-PackageUpdateRule -Id 1
Get all the custom rule with Id 1
ModuleNames to exclude from update checking
Type: String
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Exclude
- ExcludeModule
ParameterSets:
- Name: ShowAll
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The Id as an identifier for the rule
Type: Int32[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ById
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Outputs the DefautRule from the setting object, in addition to the customrules
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ShowAll
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to include from update checking By default all modules are included.
Default value is: “*”
Type: String
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Include
- IncludeModule
ParameterSets:
- Name: ShowAll
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object parsed in from command Get-PackageUpdateSetting This is an optional parameter. By default it will use the default settings object from the module.
Type: Configuration
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Set behaviour settings for PackageUpdateInfo module
Get-PackageUpdateSetting [[-Path] <string>] [<CommonParameters>]
This cmdlet has the following aliases,
Query the basic settings for check and report on up-to-dateness information on installed modules
PS C:\> Get-PackageUpdateSetting
Get the current settings on PackageUpdateInfo behaviour.
The filepath where to setting file
This is optional, default path value is: Linux: “$HOME/.local/share/powershell/PackageUpdateInfo/PackageUpdateInfo.xml”) Windows: “$HOME\AppData\Local\Microsoft\Windows\PowerShell\PackageUpdateInfo.xml”)
Type: String
DefaultValue: $script:ModuleSettingPath
SupportsWildcards: false
Aliases:
- FullName
- FilePath
ParameterSets:
- Name: (All)
Position: 0
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Import PackageUpdateInfo from a data file
Import-PackageUpdateInfo [[-Path] <string>] [-ShowToastNotification] [-InputFormat <string>]
[-Encoding <string>] [-WhatIf] [-Confirm] [<CommonParameters>]
This cmdlet has the following aliases,
Import PackageUpdateInfo from a data file previously exported with funtion Export-PackageUpdateInfo.
PS C:\> Import-PackageUpdateInfo
Try to import the default file “$HOME\AppData\Local\Microsoft\Windows\PowerShell\PackageUpdateInfo.xml”
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
File Encoding for the file
Type: String
DefaultValue: default
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The output format for the data Available formats are “XML”,“JSON”,“CSV”
Type: String
DefaultValue: XML
SupportsWildcards: false
Aliases:
- Format
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The filepath where to import the informations. Please specify a file as path.
Default path value is: Linux: “$HOME/.local/share/powershell/PackageUpdateInfo/PackageUpdateInfo.xml”) Windows: “$HOME\AppData\Local\Microsoft\Windows\PowerShell\PackageUpdateInfo.xml”)
Type: String
DefaultValue: ''
SupportsWildcards: false
Aliases:
- FullName
- FilePath
ParameterSets:
- Name: (All)
Position: 0
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This switch invokes nice Windows-Toast-Notifications with release note information on modules with update needed.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases:
- ToastNotification
- Notify
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
remove rule(s) for checking and reporting on installed modules
Remove-PackageUpdateRule -Id <int[]> [-Force] [-PassThru] [-SettingObject <Configuration>] [-WhatIf]
[-Confirm] [<CommonParameters>]
Remove-PackageUpdateRule -InputObject <ModuleRule[]> [-Force] [-PassThru]
[-SettingObject <Configuration>] [-WhatIf] [-Confirm] [<CommonParameters>]
This cmdlet has the following aliases,
This command remove existing custom rule(s) on how a modules is handled in reporting.
PS C:\> Get-PackageUpdateRule | Remove-PackageUpdateRule
Remove all custom rules for module update handling.
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If specified the user will not prompted on confirmation.
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The Id of the rule to be removed
Type: Int32[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ById
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object parsed in from command Get-PackageUpdateSetting This is an optional parameter
Type: ModuleRule[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ByInputObject
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The rule object will be parsed to the pipeline for further processing
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object from command Get-PackageUpdateSetting This is an optional parameter. By default it will use the default settings object from the module.
Type: Configuration
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Set a rule for checking and reporting on installed modules
Set-PackageUpdateRule -Id <int> [-IncludeModuleForChecking <string[]>]
[-ExcludeModuleFromChecking <string[]>] [-ReportChangeOnMajor <bool>] [-ReportChangeOnMinor <bool>]
[-ReportChangeOnBuild <bool>] [-ReportChangeOnRevision <bool>] [-SettingObject <Configuration>]
[-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
Set-PackageUpdateRule -InputObject <ModuleRule[]> [-IncludeModuleForChecking <string[]>]
[-ExcludeModuleFromChecking <string[]>] [-ReportChangeOnMajor <bool>] [-ReportChangeOnMinor <bool>]
[-ReportChangeOnBuild <bool>] [-ReportChangeOnRevision <bool>] [-SettingObject <Configuration>]
[-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
This cmdlet has the following aliases,
This command allows to edit existing rules on how a modules is handled in reporting.
For example, you can configure PackageUpdateINfo to suppress revision updates on a frequent updated module, so that only build, minor or major updates are reportet as “update needed”.
PS C:\> Add-PackageUpdateRule -IncludeModuleForChecking "MyModule" -ReportChangeOnMajor $true -ReportChangeOnMinor $true -ReportChangeOnBuild $true -ReportChangeOnRevision $false
Add a new custom rule for “MyModule” to supress notifications on revision updates of the module
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to exclude from update checking
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Exclude
- ExcludeModule
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The Id as an identifier for the rule
Type: Int32
DefaultValue: 0
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ById
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to include from update checking By default all modules are included.
Default value is: “*”
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Include
- IncludeModule
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The rule object to modify
Type: ModuleRule[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ByInputObject
Position: Named
IsRequired: true
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The rule object will be parsed to the pipeline for further processing
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when build version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, when the build version version of a module change.
Major Minor Build Revision
0 0 1 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when major version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, only when the major version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when minor version changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, only when the minor version version of a module change.
Major Minor Build Revision
0 1 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when revision part changed for a module
This means ‘Get-PackageUpdateSetting’ report update need, when the revision version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object parsed in from command Get-PackageUpdateSetting This is an optional parameter. By default it will use the default settings object from the module.
Type: Configuration
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Set behaviour settings for PackageUpdateInfo module
Set-PackageUpdateSetting [-ExcludeModuleFromChecking <string[]>]
[-IncludeModuleForChecking <string[]>] [-ReportChangeOnMajor <bool>] [-ReportChangeOnMinor <bool>]
[-ReportChangeOnBuild <bool>] [-ReportChangeOnRevision <bool>] [-UpdateCheckInterval <timespan>]
[-LastCheck <datetime>] [-LastSuccessfulCheck <datetime>] [-InputObject <Configuration>]
[-Path <string>] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
Set-PackageUpdateSetting [-Reset] [-Path <string>] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
This cmdlet has the following aliases,
Set-PackageUpdateInfo configure basic settings for check and report on up-to-dateness information on installed modules
PS C:\> Set-PackageUpdateSetting -ExcludeModuleFromChecking @("") -IncludeModuleForChecking "*" -ReportChangeOnMajor $true -ReportChangeOnMinor $true -ReportChangeOnBuild $true -ReportChangeOnRevision $true -UpdateCheckInterval "01:00:00"
Reset module to it’S default behaviour
PS C:\> Set-PackageUpdateSetting -Reset
Reset module to it’S default behaviour
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to exclude from update checking in the default rule
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Exclude
- ExcludeModule
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
ModuleNames to include from update checking in the default rule By default all modules are included.
Default value is: “*”
Type: String[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Include
- IncludeModule
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Settings object parsed in from command Get-PackageUpdateSetting
Type: Configuration
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Timestamp when last check for update need on modules started
Type: DateTime
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Timestamp when last check for update need finished
Type: DateTime
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The setting object will be parsed to the pipeline for further processing
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The filepath where to setting file is stored
This is optional, default path value is: Linux: “$HOME/.local/share/powershell/PackageUpdateInfo/PackageUpdateSetting.xml”) Windows: “$HOME\AppData\Local\Microsoft\Windows\PowerShell\PackageUpdateSetting.xml”)
Type: String
DefaultValue: ''
SupportsWildcards: false
Aliases:
- FullName
- FilePath
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when build version changed for a module in the default rule
This means ‘Get-PackageUpdateSetting’ report update need, when the build version version of a module change.
Major Minor Build Revision
0 0 1 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when major version changed for a module in the default rule
This means ‘Get-PackageUpdateSetting’ report update need, only when the major version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when minor version changed for a module in the default rule
This means ‘Get-PackageUpdateSetting’ report update need, only when the minor version version of a module change.
Major Minor Build Revision
0 1 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Report when revision part changed for a module in the default rule
This means ‘Get-PackageUpdateSetting’ report update need, when the revision version version of a module change.
Major Minor Build Revision
1 0 0 0
Type: Boolean
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Reset module to it’S default behaviour
Type: SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: ResetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
The minimum interval/timespan has to gone by,for doing a new module update check
Default value is: “01:00:00”
Type: TimeSpan
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: SetBehaviour
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Show release notes from a module
Show-PackageUpdateReleaseNote [[-InputObject] <Info[]>] [-WhatIf] [-Confirm] [<CommonParameters>]
Show-PackageUpdateReleaseNote [[-Module] <psmoduleinfo[]>] [-WhatIf] [-Confirm] [<CommonParameters>]
This cmdlet has the following aliases,
Show release notes from a module.
PS C:\> Get-PackageUpdateInfo | Show-PackageUpdateReleaseNote
Get release notes out of PackageUpdateInfo objects
PS C:\> Get-Module PackageUpdateInfo | Show-PackageUpdateReleaseNote
Get relase notes from a module
If this switch is enabled, you will be prompted for confirmation before executing any operations that change state.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Input object(s) from Get-PackageUpdateInfo or Import-PackageUpdateInfo to show release notes
Type: Info[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- Input
ParameterSets:
- Name: ByPackageUpdeInfoObject
Position: 0
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
Input object(s) from Get-Module to show release notes
Type: PSModuleInfo[]
DefaultValue: ''
SupportsWildcards: false
Aliases:
- ModuleName
ParameterSets:
- Name: ByModuleObject
Position: 0
IsRequired: false
ValueFromPipeline: true
ValueFromPipelineByPropertyName: true
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
If this switch is enabled, no actions are performed but informational messages will be displayed that explain what would happen if the command were to run.
Type: SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
Position: Named
IsRequired: false
ValueFromPipeline: false
ValueFromPipelineByPropertyName: false
ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.